

Compton Trailer Supplies
A trailer rarely fails all at once. In Compton, it's usually one small part that forces a bigger decision: a running light that won't stay on, a coupler that won't latch cleanly, a hub that starts running hot, or brakes that feel uneven on a stop. When you're hauling tools, equipment, inventory, or an RV, those "small" problems can turn into downtime, unsafe towing, or damage to the trailer itself.
Arrow Trailer Supplies keeps Trailer Supplies on hand so you can replace what's worn, match what fits, and get back to towing with confidence. Founded in 1965 and operating from the same location for the past 61 years, we focus on parts knowledge and correct fitment, with experienced technicians trained to service all makes and models. If you already know what you need, we'll help you confirm sizing and compatibility. If you don't, we'll walk through the measurements and identification that keep you from buying the wrong part twice.
Trailer Supplies for running gear, braking, lighting, and secure towing
"Trailer supplies" isn't one category. It's the collection of components that carry the load, control it, and keep the trailer legal and predictable behind your vehicle. The most important purchases are the ones that match your trailer's actual configuration: axle capacity, hub pattern, brake type, coupler size, and electrical connector style.
For many Compton trailer owners, running gear is the first place to spend attention because it's where wear turns into roadside trouble. Hubs, bearings, seals, and brake parts work together. Mixing incompatible parts can cause leaks, overheating, or braking that pulls to one side.
- Running gear: hubs/drums, bearings, seals, dust caps, spindle hardware, and related service parts
- Brakes: brake assemblies and wear items (electric or surge components depend on your setup)
- Suspension and support: leaf springs, hangers, U-bolts, equalizers, and jacks
- Hitch and coupling: couplers, ball mounts where applicable, safety chains, breakaway-related components for braked trailers
- Electrical and lighting: trailer wiring, connectors, junction/connection points, lights, and mounting pieces
- Load control and protection: tie-down points, straps and hardware, and practical RV accessories for travel trailers and campers
If you're towing in stop-and-go traffic, making frequent short trips, or hauling heavier loads, heat and repeated braking cycles can expose weak bearings and marginal brake adjustment faster than occasional weekend use. The right supplies and the right fit are what keep that wear from becoming a breakdown.
How we help you choose the right parts the first time
Correct fitment is the whole job. Two trailers can look similar and still use different hub faces, bearing numbers, brake flange patterns, or coupler sizes. A "close enough" part can create new problems: wobble, noise, uneven pad/shoe wear, or a light circuit that keeps blowing fuses.
Here's what we focus on at the counter and in the shop so the part you buy actually solves the issue:
- Identify what system you're working on. Running gear and brakes are tied together. Electrical issues often come from grounding, connectors, or damaged wiring near the frame.
- Confirm the critical measurements. Common checks include bolt pattern, hub/drum dimensions, bearing and seal IDs, coupler size, and jack mounting style. For lights, we match lens/fixture style, mounting, and connector type so it installs cleanly.
- Read the part numbers when they're available. Bearing and seal numbers, axle tags, and brake assembly labels are the quickest way to avoid a mismatch. If the markings are worn off, we fall back to measurement and component comparison.
- Match the trailer's load and use. Supplies that live on a lightly used utility trailer don't always hold up the same way on frequent-haul equipment trailers or travel trailers. We'll point you toward parts that suit the duty, not just the cheapest replacement.
- Check the surrounding wear. Replacing one item without addressing the cause can waste time. A new seal won't last if a bearing is pitted or a spindle surface is damaged. A new light won't stay on if the ground path is weak.
If you're not sure what to bring, a few basics help a lot: photos of the axle/hub/brake area, measurements you've taken, and any old parts you removed. If you're dealing with a wiring issue, a clear photo of the trailer plug and the light fixture connector saves guesswork.
What to watch for before a small issue becomes a tow problem
Trailer parts don't fail politely. A bearing can go from "a little noisy" to damaging a spindle. A coupler that feels sticky can stop latching securely. A weak breakaway setup on a braked trailer turns into a serious risk if the trailer separates. The point of stocking the right trailer supplies in Compton is preventing the chain reaction that starts with one worn item.
Pay attention to these warning signs, because they usually mean you need parts soon, not later:
- Heat at the hub: a hub that's noticeably hotter than the others after towing can indicate bearing, grease, or brake drag issues
- Grease on the inside of a wheel: often points to a failed seal, and it can contaminate brakes
- Trailer pulls or brakes inconsistently: can come from worn brake components, incorrect adjustment, or mismatched parts side-to-side
- Clunking at the hitch: can be coupler wear, latch issues, or hardware that needs replacement
- Intermittent lighting: often a ground or connector problem, not the bulb or LED module itself
We also stock RV accessories and practical travel-trailer items because many owners want to solve the towing problem and the camping-use problem in one stop. Our technicians handle maintenance for RVs, motorhomes, travel trailers, and campers, so the recommendations stay grounded in what actually holds up on the road.
Brands We Work With
For running gear, we stock parts from many manufacturers and regularly work with:
- Dexter
- AL-KO (Hayes)
- UFP
If you already know your axle or brake brand, tell us up front. If you don't, we can still match what you have by the identifiers and measurements that matter.
FAQ: buying trailer supplies in Compton
What information should I bring to match hubs, bearings, and seals?
Bring any bearing and seal numbers you can read, plus the hub/drum details if available. If the numbers aren't readable, bring the old bearings and seal (or clear photos) and basic measurements. Matching by "looks similar" is where most wrong purchases happen.
Do I need to replace bearings and seals together?
If you're already in the hub and the seal has failed or grease has leaked, replacing the seal and inspecting the bearings is smart. A new seal installed over worn or pitted bearings often ends with another leak or overheating. We'll help you sort what's reusable and what isn't based on the condition you can see.
How do I know if my trailer has electric brakes or surge brakes?
Electric brakes use wiring to a brake controller in the tow vehicle and have brake assemblies at the wheels. Surge brakes use a coupler that compresses under braking to apply hydraulic pressure. The parts are not interchangeable, so identifying the system is the first step before buying brake supplies.
My trailer lights work sometimes. What usually causes that?
Most intermittent issues trace back to grounds, corrosion at the connector, pin fit at the plug, or a damaged wire where it runs along the frame. Replacing the light alone doesn't fix a weak connection. We can help you choose wiring and connector supplies that match your plug style and mounting needs.
Can you help if I'm not sure what parts my trailer uses?
Yes. That's a common reason people come in for trailer supplies. With a few photos, part numbers when available, and key measurements, we can narrow the options quickly and keep you from installing something that doesn't fit or doesn't carry the load your trailer sees.
If you're dealing with a worn hub, inconsistent braking, or a hitch connection that doesn't feel right, don't wait for the next tow to confirm it. Get the trailer supplies that match your setup and fix the cause, not just the symptom.
Arrow Trailer Supplies serves Compton with a deep selection of parts and RV accessories, backed by technicians trained to service all makes and and models. Bring what you know, bring what you can measure, and we'll help you leave with components that fit, work, and hold up on the road.
